looking for some good injectors, pump etc. ive looked on honde tech and saw some guys getting 400 whp, with walboro 225, and 750 cc injectors. i would just like some ideas for a 350 to 400 whp fuel set up.
I have Grams 1000cc injectors and a DeatschWerks 265 LPH pump which is model DW65c. No return line and I hit 446HP on 13psi. I no 650cc would not work cause that is what I had before I upgraded my turbo and they were maxed out.
run a -8an feed, -6an return with a 255lb and the 750cc will be fine for 350-400. But that'll push it.
I ran 1000cc and maxed at 500whp because I ran a -6an feed and it didn't flow enough to the injectors.
I had 750s on my 320whp supercharger build with no issues.
I was just wondering if anyone might be able to help me out with replacing my IMRC solenoid valve. just a step by step thing would be awesome. I know I would probably be looking to remove my front bumper cover and bumper bar to access it. but any body else with more knowledge on this then...
Hey guys im very new to the rsx fam i have a 2004 rsx base auto 120k miles maintained and all good had for about almost a year now ,so :giggity::thumbsup:i would like to know what is all the things i would need to make it a all motor rsx
Just received my Spoon throttle body which is bored to 70mm on the inlet and tapers down to 64mm on the outlet side. This is essentially a brand new throttle body with all sensors included. The only reason I got this was because it was the same price (roughly) as an OEM throttle body and I was...