Acura RSX, ILX and Honda EP3 Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
Okay Gents. I Have Already Cleaned The Iacv And Put It Back Together And Were Getting The Same Thing That Started. The P0507 And P2279 Are Still Being Thrown Up. I Know It Says It's An Intake Manifold Leak, But Where Do I Start With That. I'm Going Down To Georgia And Need It Fixed. Any Help Asap. Thanks!!!!!
 

·
Breast inspector by appt.
Joined
·
9,245 Posts
potential sources of intake leaks:

1. PCV valve or hose (on the passenger side of the intake manifold)
2. EVAP purge valve or hose (on top of the throttle body)
3. Throttle body gasket
4. Intake manifold gasket or cracked or loose intake manifold
5. Intake air bypass control thermal valve or hose (by the valve cover)
6. Brake booster hose (connects to the intake manifold)
7. Idle air control valve gasket (on the bottom of the throttle body)
 

·
Breast inspector by appt.
Joined
·
9,245 Posts
if you haven't had work done on any of those parts, then it's likely a loose or split hose. if any work has been done in those areas, check for incorrect installation, especially when it involves any kind of gasket.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top