3
EDIT here is a vid so you can see what I am talking about!
http://www.youtube.com/watch?v=z4DXSxZp9NU
First lets start off with what type of coilovers I have. They are tanabe sustec pro II (they are not damper adjustable and you use stock top mounts.)
They are also installed on an Acura RSX-S
Alright so here is the problem. In the rear I put everything that was on the top part of the stock strut on this one. Well everytime I hit a bump the shock does what I would say is seperates from the top mount. I took a picture and the pink color is the gap after I went over a bump. How big of a bump? My durb to my driveway :crook: The black part that the red arrow is pointing to stays in place and the rest of the strut moves upward. It happens if I stand in the trunk and jump up and down =( Also attached is a picture of all the parts that came with it. Maybe I am missing something??
Was I supposed to put this part in the the coilover set up any place?
If so where? I just looked at the stock rear shocks and I have these left over but the directions from tanabe do not say anything about this piece.
