Acura RSX, ILX and Honda EP3 Forum banner

How to add light in Mugen read bumper hole

998 views 16 replies 6 participants last post by  coltzxli 
#1 ·
Ive tried to wire it up but it wont work. I tapped the red wire on the outer most bulb and grounded the negative, no luck.

Any tips? do I need to ground my negative to the bulb negative in order to complete the circuit?
 
#2 ·
First make sure you have power. Taps don't always make contact. Any metal should be a ground but you could test from your ground to your tapped wire to make sure. I know it sounds stupid but make sure your lights are on when you test the wires.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top