Acura RSX, ILX and Honda EP3 Forum banner

How to select a Fuel Rail

787 views 9 replies 8 participants last post by  akinaspeedstars1 
#1 ·
AEM / BDL / Eagle............all well known names for sure. But what are the "key" features/functions to look for? I'll be running a fuel pressure gauge if that make any difference in selection... :dontknow:
 
#3 ·
bore makes a big diff... aem is only a 6an bore which makes a big deal if your going for huge power.

bdl, ge are more suitable for high power with close to a 1/2" center bore if I remember correctly
 
#7 ·
At what point (hp wise) does the fuel rail need to be upgraded. Also, I ran RC650's in my last Cybernation 60-1hifi setup and they were @ like 80% load if I remember correctly. So I am "assuming" that since that "kit" but out around 310ish @ 10psi, on a gt30R @ 14psi...400ish i'll need more than jut 650's. Hence the RC750s and interest into a Fuel rail and walbro.

Hrmmmm....thoughts?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top