Acura RSX, ILX and Honda EP3 Forum banner
1 - 20 of 76 Posts

· Registered
775 Posts
Discussion Starter · #1 · (Edited)
up for sale is my lysholm 1600ax setup. Most of this is not off the shelf parts, a lot of it custom made to order and takes a LONG time to get! A lot of the parts are brand new!
Sold as a complete kit only! Unless the supercharger sells first!
Reasonable offers will be considered!
If you would like pics of anything please text me 661-645-4025
So here's what I have:

Lysholm 1600ax twin screw supercharger (brand new)
Jrsc manifold. (Used but very clean)
Adapter plate to bolt the supercharger to the manifold. (Brand new)
Merc racing inlet made for the lyshom. (Brand new)
3.2 and 3.4 supercharger pulleys (brand new)
Bypass assembly (brand new)



Merc racing after cooler core (gen1) (used great condition)
Merc racing heat exchangers (I have 2) one is extra thick 3" the other is about 1.5" thick (both used in great condition)
Custom made ice box for the after cooler one off piece (used in great condition)
All hoses and hardware for the after cover setup
Custom valve cover with catch can one off piece (used in great condition)
Boost by gear setup everything included. (Used great condion)


WITHOUT 3" heat exchange and ice box


Valve cover catch can setup. Custom made. The red has been stripped and ready for powdercoat. The catch can is still wrincle black


This motor is mint! Super low miles ready to go!
Full super tech valve train, ARP studs, head gasket, a2 or z1 Cams, Skunk or prb cam gear, ktuned billet thermostat and upper coolant neck, p2r billet mount all stainless hardware. All aftermarket parts are new

K20a3 trans low miles about 30k
Quife installed but never used.ktuned billet cable bracket Stainless hardware with beauty washers

Rywire milspec harness

fuel return setup
Fuel lab pressure regulator, fuel lab large filter, red horse braided line, red horse AN fittings, submersible line

Ep3 electronic power steering
What I have is what's in the pic

Abs delete with tucked clutch line and prop valve

Competition clutch stage 4 Bnib

Competition clutch 8lb flywheel Bnib

Hondata 4 bar map. Bnib $80

T1 motorsports I at sensor. Bnib

Beaks tie bar Bnib SOLD

ATI steering column dual gauge pod $75

IAT gauge Used $30

Unorthadox pulleys. Crank, PS and alternator Mint SOLD

Flush spark plug cover SOLD

Hybrid racing oil cap - SOLD

Ktuned valve cover breather- $20

Acura RL 4 piston calipers. (Acura shave off, cleaned for powder coat) $350

Personal suede steering wheel, works bell quick release and lock $500

Boost by gear w/ dual port bypass valve SOLD

K24 Hasport adapter plate SOLD

· DontGiveAFuck ¯\_(ツ)_/
841 Posts
how much for just the steering wheel?

· Registered
713 Posts
Pm me price on steering wheel how big is it smaller then stock?
Also I have a insane sc setup I spent alot on.
Wish you were selling this. I would of bought it for sure
I got a comptech sc upgraded merc inlet custom
Stage 2 aftercooler complete all the pulleys injectors 750 rc
Fuel pump walbro etc etc it never ends
1 - 20 of 76 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.