Acura RSX, ILX and Honda EP3 Forum banner

JRSC belts & pulleys: please discuss it here

49489 Views 819 Replies 63 Participants Last post by  iamsyko
I know a lot of us JRSC guys having or had problems with our belts and pulleys and a lot of time we hijacking other threads because of it, so I thought it was a good idea to start up on a thread just about jrsc belts and pulleys. The thread is not only for current jrsc peeps but also for the newbies as well so they won't get us frustrated asking the same question over and over again.

I'll start off with one question, I read around and found a member who is using a goodyear 070775 belt which is 7 rib and 77.5 inches long. I tried a dayco belt that was 77.5 long and it wasn't even anywhere close to fitting onto the 3.4 pulley. The dayco 78.9 belt fit extremely well for the purpose. What I want to know is that anyone else tried the goodyear 77.5 long on a 3.4 pulley or is it because different makers make belt a little bit different in length.

TT
1 - 1 of 820 Posts
ok i want to get a gator back belt for my 05 setup, im going to have the a2 crank pulley and im going to have the 3.4 pulley what size gaotback belt will i need and whats the part number and where can i order it from thanks for any help ill rep it up
1 - 1 of 820 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top