JRSC belts & pulleys: please discuss it here
781 - 800 of 820 Posts
Joined
·
3,079 Posts
Because my 3rd gear goes up to as high as 105mph at 7700 RPM
This was on the freeway. I pulled over because I heard the familiar sound of the bits and pieces of the belt slapping against my hood. I drove home with only 2 ribs. I always carry an extra belt with me so I changed it when I got home. Tomorrow I have to go buy a few more belts.
This was on the freeway. I pulled over because I heard the familiar sound of the bits and pieces of the belt slapping against my hood. I drove home with only 2 ribs. I always carry an extra belt with me so I changed it when I got home. Tomorrow I have to go buy a few more belts.
Nothing would happen to the boost. It's driven off the crank pulley (as is the alternator). You might pick up a fraction of a hp, but depends on the electrical load on your alternator i.e. turn off everything you don't need like CD player, vent fan, etc. :thumbsup:JordoKap said:
Joined
·
6 Posts
How much are you selling the pulley for, and what psi is it, also anotha question, whats the best way to route the belt, the jrsc way or a diff way?
Ive thrown like 4 belts already, kant seem to find the problem, still a newbie wit the supercharger.
Ive thrown like 4 belts already, kant seem to find the problem, still a newbie wit the supercharger.
Joined
·
2 Posts
jackson racing supercharger
I just recently applied the JrSc to my rsx and i was told if i changed out the hermonic balancer, dampner i will gain about 2 psi of boost to my already 7 psi.
Do you guys know anyting about that? Can i still you the same 79 inch belt that i have on my car?
I just recently applied the JrSc to my rsx and i was told if i changed out the hermonic balancer, dampner i will gain about 2 psi of boost to my already 7 psi.
Do you guys know anyting about that? Can i still you the same 79 inch belt that i have on my car?
Joined
·
7,826 Posts
ok i want to get a gator back belt for my 05 setup, im going to have the a2 crank pulley and im going to have the 3.4 pulley what size gaotback belt will i need and whats the part number and where can i order it from thanks for any help ill rep it up
Joined
·
2,528 Posts
alright guys, im a noob at this supercharging stuff. but someone help me out. i have a 05-06 rsx, with a 02-04 jrsc. im going to be running a k20a2 crank pulley with a 9psi pulley (02-04). not sure if thats a 3.2? well i need to buy some belts for it, and i dont know where to get it and what size or part # it is. please someone help me out. thanks
Joined
·
4 Posts
Can someone please help me out !!
I have a 08 si with the jrsc which this kit is identical to the rsx kit ( http://www.supercharger.com/Shop/ViewProducts.aspx?PlateIndexID=70327 ) My question is I need to know the belt size on this kit. I know its a 3.2 inch pulley and 7 ribbed but I dont know the s/c belt size ???
I have a 08 si with the jrsc which this kit is identical to the rsx kit ( http://www.supercharger.com/Shop/ViewProducts.aspx?PlateIndexID=70327 ) My question is I need to know the belt size on this kit. I know its a 3.2 inch pulley and 7 ribbed but I dont know the s/c belt size ???
G
Guest
·Have you called Moss to ask?
Joined
·
4 Posts
Im calling tomorow but this has been on my mind since Friday after they were closed !!!! And im going nuts trying to figure this out and if you go on there site they dont even list belts for my car kinda odd
G
Guest
·Have you tried 8th Gen Civic or any of those other K-motor sites? Maybe some of those guys have your supercharger installed.
Joined
·
4 Posts
Im on 8thgen all the time but 99.9 percent of any s/c guy has the comptech kit. They are not many people with the JR kit that I know of in an 06 + civic si. And I have also took a look at k20a.org to see if anything was there as well. Came up empty. All I have seen if they did have my kit but a 3.4 in pulley or a 3.6 even 3.8 but nothing about the belt size on a 3.2 inch. And I figred it would be different size belt if its on a different size pulley.
781 - 800 of 820 Posts
