Acura RSX, ILX and Honda EP3 Forum banner
1 - 20 of 61 Posts

·
TeamDC5
Joined
·
748 Posts
Discussion Starter · #1 ·
I just dynoed today on a dynojet with hondata 4, aem cai, fujitsubo power getter exhaust, and jackson racing race header w/test pipe. I hit 206.6 hp and 145.7 ft/lbs uncorrected and it was about 75 degrees out(ill try and post the dyno), and I am quite impressed because before i hit 189.6 hp without hondata and a greddy evo exhaust. Also just before i went to the dyno i bolted on my power getter, and all i can say it sounds friggin' badass with the jr header, nice deep throaty sound while being quiet at the same time. :thumbsup:
 

·
Old member
Joined
·
2,641 Posts
Nice! :thumbsup:
 

·
Registered
Joined
·
7,350 Posts
I guess the JR header is only a few hp higher than a shorty + cat combo...but then again cant really compare actual dyno figures from different dynos etc... :dontknow: .
 

·
TeamDC5
Joined
·
748 Posts
Discussion Starter · #4 ·
hey mmmotornutz, i didnt know those slicks were on sale yet. Neways i wanna buy a set, so what methods can I pay for em' with, and who is distributing them?
 

·
Registered
Joined
·
7,350 Posts
BlueRSXS03 said:
hey mmmotornutz, i didnt know those slicks were on sale yet. Neways i wanna buy a set, so what methods can I pay for em' with, and who is distributing them?
ORDER YOUR M+H RACING SLICKS NOW! GET 1.8XX 60's, CALL JOHN @ 661-324-4773, HE WILL ANSWER ALL OF YOUR QUESTIONS, THESE WILL FIT OUR STOCK RIMS!!!!!!
 

·
Must...stop...modding!!
Joined
·
3,953 Posts
Dont mean to hijack the thread, but I was number 4 on the list to order the slicks....anyone know what number John is on now?
 

·
Registered
Joined
·
4,313 Posts
they arent for sale yet. They are still waiting for the 50 buyers.

BlueRSXS03-I was just reading thru this thread, then I realized your location said south fl. I was like wow, who is this guy, never heard/seen of him before. Then I started reading yourm mods and was like o its henry. :thumbsup:

Where did you dyno at? those are some nice numbers. So what is your best et now, I havent been to the track since my 13.6, my azeni's are completely bald.
 

·
Must...stop...modding!!
Joined
·
3,953 Posts
DC5 RSX said:
they arent for sale yet. They are still waiting for the 50 buyers.

BlueRSXS03-I was just reading thru this thread, then I realized your location said south fl. I was like wow, who is this guy, never heard/seen of him before. Then I started reading yourm mods and was like o its henry. :thumbsup:

Where did you dyno at? those are some nice numbers. So what is your best et now, I havent been to the track since my 13.6, my azeni's are completely bald.
I know they aren't for sale yet......i just wanted to know if any1 knew what number we were on because when I called I was #4.....thanks!
 

·
yawn..
Joined
·
22,903 Posts
not bad for a uncorrected dyno.
 

·
TeamDC5
Joined
·
748 Posts
Discussion Starter · #11 ·
DC5 RSX said:
they arent for sale yet. They are still waiting for the 50 buyers.

BlueRSXS03-I was just reading thru this thread, then I realized your location said south fl. I was like wow, who is this guy, never heard/seen of him before. Then I started reading yourm mods and was like o its henry. :thumbsup:

Where did you dyno at? those are some nice numbers. So what is your best et now, I havent been to the track since my 13.6, my azeni's are completely bald.
lol. i havent been to moroso in a week two but last time i went i was hittin consistent 14.2's and it was pretty hot out, but i think im going again on wednesday. I still cant nail those 60 ft's, and I was gettin 2.24-2.29's. I dynoed at TPS. With the std correction it was 206.2 hp. so maybe when its cold again i could possibly hit 13's. later man
 

·
TeamDC5
Joined
·
748 Posts
Discussion Starter · #12 ·
EBP-RSX-S said:
SAE corrected will be about 10 horses less tho. I got the same exact mods as you lol
I believe the SAE corrected horsepower was about 201.x, and the STD corrected was 206.2.
 

·
Skepticism Extraodinaire
Joined
·
4,163 Posts
NxtLvlRSXtypeS said:
I know they aren't for sale yet......i just wanted to know if any1 knew what number we were on because when I called I was #4.....thanks!
I'll call and see....
 

·
Registered
Joined
·
1,855 Posts
nice numbers
 

·
Registered
Joined
·
4,814 Posts
DC5 RSX said:
BlueRSXS03-I was just reading thru this thread, then I realized your location said south fl. I was like wow, who is this guy, never heard/seen of him before. Then I started reading yourm mods and was like o its henry. :thumbsup:
Henry with the Blue RSX ? a few Fridays back at moroso ? I didnt even realize it was him. I didnt know he posted here. :wavey:
 

·
Registered
Joined
·
4,814 Posts
BlueRSXS03 said:
but i think im going again on wednesday. I still cant nail those 60 ft's, and I was gettin 2.24-2.29's. I dynoed at TPS.
I am gonna be at the track tommorow, were u their last week ? I remember seing a blue rsx. Dont know if it was u.

EDIT: Wheres TPS, is that in dixie highway around belvedere ? how much did they charge u ?
 

·
TeamDC5
Joined
·
748 Posts
Discussion Starter · #17 ·
Acuraivtec said:
I am gonna be at the track tommorow, were u their last week ? I remember seing a blue rsx. Dont know if it was u.

EDIT: Wheres TPS, is that in dixie highway around belvedere ? how much did they charge u ?
Ya tps is on Dixie between Belvedere and Okeechobee on the East side of the road. Ya i was there like a week or two ago when John was there. And ya im gonna go to the track today, but do u know if anyone else is going?
 

·
Registered
Joined
·
4,814 Posts
BlueRSXS03 said:
Ya tps is on Dixie between Belvedere and Okeechobee on the East side of the road. Ya i was there like a week or two ago when John was there. And ya im gonna go to the track today, but do u know if anyone else is going?
Reuben got no tires, Jenn. said shes working, John doesnt have his car at the moment. I dont know if Danillo or Brian (apexi) is going. But I dont want to be the only RSX their again like last wednesday. The other 2 rsx were base.

See yeah their tonight I dont know what u look like.
 

·
Registered
Joined
·
4,473 Posts
Acuraivtec said:
Reuben got no tires, Jenn. said shes working, John doesnt have his car at the moment. I dont know if Danillo or Brian (apexi) is going. But I dont want to be the only RSX their again like last wednesday. The other 2 rsx were base.

See yeah their tonight I dont know what u look like.
I wont be there. Tranny still needs work.....I think Ill call acura right now.

EDIT: Car goes in Monday....It's about freaking time. I have had this grind for a year now :firemad: :jigglemad
 
1 - 20 of 61 Posts
Top