Acura RSX, ILX and Honda EP3 Forum banner

K24 spec pistons on k20 long block

2K views 0 replies 1 participant last post by  solidpr 
#1 ·
I have a K20 Darton Sleeved Block with 87mm Wiseco pistons 11.7:1. One of the pistons bite the dust and the block needs to be bored .5 to 1mm in order to get it ready again. I found a good deal in some Supertech 87.5mm 12.5:1 K24 spec pistons. Reading some info I found that the compression will drop if I use K24 specs pistons in a K20 block due to the shorter stroke, if so, how much compresion drop I can expect? And also, I want to know if Im going to run in some Valve to Piston clearance problem using the k20 head with those k24 Spec Pistons.

Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top