I did a leak down test on my K20A3 engine with the following results with 28 PSI of pressure.
#1 - 8% (Constant)
#2 - 8% to 10%
#3 - 8% to 10 %
#4 - 10% (Constant)
Is this within specs?
I think I am going to take the header into the shop to inspected/rebuilt just for good measure.
#1 - 8% (Constant)
#2 - 8% to 10%
#3 - 8% to 10 %
#4 - 10% (Constant)
Is this within specs?
I think I am going to take the header into the shop to inspected/rebuilt just for good measure.