Acura RSX, ILX and Honda EP3 Forum banner

MajorLeague's "One day I'll be cool" EP3 Mini Van Build thread

12K views 146 replies 27 participants last post by  Dad 
#1 · (Edited)
]Hello ClubRSX! The premium members know who i am, i know that for sure :hihi:, but I'm coming from Clubep3. I'm over here more then there, and realized i have never made a members ride thread. I don't know how many of you go over there, but i'll just make another show-off thread here for the people who don't.

Enjoy & Thanks for looking


Parts List

Engine
K20A2
Rev Hard Manifold
Precision SC3431E Turbo
Cheap Intercooler
Greddy BOV
Tial Wastegate
550cc RC Injectors
Nology Hotwire
Hondata K-Pro
3" Unforgettable Test Pipe
3" Custom Made Exhaust
ITR LSD Tranny
Competition Clutch Stage4 Clutch
Competition Ultra Light Flywheel (8lbs)
Buddyclub Short Shifter
Hybrid Racing Fuel Rail/Fuel Pressure Gauge (Feed&Return Setup) (Needs to be installed)
Walbro 225 Fuel Pump

Exterior
FEEL's Grille 3rd One On The North American Boards w/ It
Buddyclub Side Skirts
Custom Made 15mm Flared Fenders
Custom Kelvar Duckbill Wing
Custom Foglight External Battery Mount
04-05 CTR LHD Euro Spec Headlights w/ Custom made Conversion Harness
6000k HID Kit
Custom Spaced 15mm Carbon Fiber Fenders (Summer Gear)
Carbon Fiber OEM Hood (Summer Gear)
Retro-Fitted Volvo Lip
JDM Preface Lift Front Bumper (Needs to be installed)
JDM Preface Lift Type R Lip (Needs to be installed)
JDM Rear Bumper (Needs to be installed)
Jdm Type R Rear Lip (Needs to be installed)

Interior
DIY Flat Black Center Dash
Custom Brushed Aluminium Placards
Custom X Brace
J's Racing C pillar
No Name Mid Rear Bar
Wink 5 Panel mirror
S2k Start button
RSX-S Hazard button
RSX-S Tan Shift Knob
Burrberry door panels
Cusco Door Bars
Buddyclub Super Low Rails Driver/Passenger
Bride Zeta II Driver/Passenger
Takata Harnesses
Pioneer Fold Out TV
HKS Turbo Timer
Rennline Battery Disconnect Switch

Wheels/Suspension
RSX 5 lug Swap
Highlighter Yellow 02-04 RSX Stocks
15mm H&R Spacers
Falken 225/50/16
Ingalls front/rear Camber Kit
Tokico Blues W/ H&R Springs
Gold Skunk2 LCA
Gold Beaks Lower Tie Bar

Fall 2013










Pictures to come once new make over is looking close to proper.
 
See less See more
9
  • Like
Reactions: Andy.
#11 ·
:rwavey:

Man, i feel like i really let some people down with this title.
 
#15 ·
They are carbon fiber. The cloudy day really hides the weave.
 
#16 ·
Only if it is spray2020 modified. ;)
 
#17 ·
Here is a quick shot to end the unpainted fender comments.

 
#28 · (Edited)
There are a few aftermarket fender choices out there. Carbon fiber, J's Racing 20mm, and a bunch of ricer widebody kits.
I want something different, Then again I always want to be different. So, i have came to the conclusion that i will make my own.

I will be making widebody style front fenders. Hoping the end product will look something like this.



They wont stick out that far but they will be open vented as shown.

Here is the drawings I came up with. The vented gap will be about 1 inch.






I will be modifying the oem fenders into them. Once complete I will make a mold and make a set out of fiberglass.

If all goes well i will be making another custom duckbill wing to fit to my collection.
 
  • Like
Reactions: Andy.
#29 · (Edited)
That passenger side fog light hole has been bugging me for awhile. I put a piece of black vinyl to cover it. Work was slow today si i diceide to custom fab a mounting bracket for my external battery terminals there. I still need to paint he fog light housing, and bond the plate to the housing but this is what i got so far. LMK if you guys want a DIY on this.




 
  • Like
Reactions: Andy.
#30 · (Edited)
Here is the finish product on the battery terminals.

I used Epibond to attach the two together.

Tomorrow i'll have pics of it mounted.


 
  • Like
Reactions: Andy.
#31 · (Edited)
Put my CTR headlights in. Thanks to Tonyli I mounted a volvo lip on. This weekend i
ll be putting my battery disconnect switch in and external battery terminals on.

I'll have another photo shoot when i put one of my cf hoods on and my cf fenders back on.

I'm planning on painting the wheels neon yellow too.
 
  • Like
Reactions: Andy.
#32 · (Edited)
 
#35 · (Edited)
Shit you found my showoff.

I was going to bump this once the car looked good again. :rotfl:

Well, I have a lot to do to the car..

Right now I just need to get the silicon mold to remake the fenders in to fiberglass for dat light weight.Then, new wheels to fill them in.

I'll put back on the CF front end stuff once the weather looks better.



I actually really like these and they're light weight. These or the BuddyClub QFs. The QFs are lighter then RPF1s but cost 2.5K. The pictured ones cost about 1.2K

Maybe front 17x9.5 rears 17x8.5 +22

What do you guys think? Should i just go with 8.5 all around?

I shaved the inner fender on the CF fenders and extended the mounting points 10mm. At +20 I'm still sunk in the fender. Want to push it to a +15 or +10 and like -1.5 or -2.0 camber.

I got custom Purple & black vacuum fittings w/line, custom ABS cover, and hopfully a midori green hybird racing fuel rail coming. Next is your VC :laughing: Then wheels.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top