Acura RSX, ILX and Honda EP3 Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter · #10 ·
245-255. Will need a roll for sure. I ran 215 with "natural" camber that was around -3 without having to roll the rear. You're probably around -2 with that drop if you don't have a camber kit in the rear.
So I would probably go for 245/40/17 then and I've got a camber kit in the rear so would I be able to zero out the camber myself or do I need to take it to a shop.
 

·
Registered
Joined
·
99 Posts
Discussion Starter · #16 ·
Can only provide so much info over the Internet. Just look at pictures and go for what you want. If you're moderately low, you'll need to run a small amount of camber. It's a 9" wide wheel with a +30 offset on a Honda.
I don't mind a Lil bit of camber as long as it isn't insane
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top