Acura RSX, ILX and Honda EP3 Forum banner
141 - 160 of 186 Posts

·
Elite Member
Joined
·
129 Posts
mods in sig.
 

·
ED's FOB Twin
Joined
·
6,718 Posts
aii..Let me see what I got.

Injen SRI(Injen CAI coming in)
Tsudo catback(weak)
Megan Coilover
Blackout / Redout
Cwest front lip
Cwest sideskirts
Comptech SS
Pioneer DEH-P6800 Headunit
Viper Alarm
 

·
Registered
Joined
·
3 Posts
MOTOR / ECU / COOLING:

Boomslang Wiring Harness
Custom Oil Catch Can
Cybernation 3" Downpipe
Cybernation Dump Tube
Cybernation Turbo Manifold
DEI Thermal Wrap
ESH Custom Exhaust Silencer
ENJO Motor Mounts
FilterMag RA-300
Greddy E-Manage Ultimate
Greddy Oil Filter Block Adapter
HKS Grounding Kit (rep)
K&N Air Filter
K&N Crankcase Filter
K&N Oil Filter
K-Teller 3" Mandrel-Bent Piping
K-Teller 14" Resonator (3" ID)
Magnaflow 3" Race Series Muffler
Magnaflow 3" Catalytic Converter
NGK Iridium Xtreme Spark Plugs
Odyssey Drycell Battery
RC 550cc High Impedance Injectors
RC Injector Clips
Spoon Magnetic Oil Drain Bolt
Spoon Radiator Cap
Turbonetics Evolution Wastegate
Turbonetics Spearco Intercooler
Turbonetics T3/T4 Turbo
TurboXS RFL Blow Off Valve

SUSPENSION / WHEELS / TIRES / BRAKES:

ITR DC5 Brake Ducts
ITR DC5 Floor Bar
Mugen Front Strut Tower Bar (rep)
Mugen Rear Strut Tower Bar (rep)
Progress Rear Anti-Roll Bar
Progress Rear Lower Tie Bar
SPC Front Camber Kit
SPC Rear Camber Kit
Tein Flex Coilovers

INTERIOR / EXTERIOR:

Autometer A-Pillar Triple Gauge Pod
Autometer Air/Fuel Gauge
Autometer Boost Gauge
Autometer Clock
Autometer Oil Pressure Gauge
Autometer Oil Temp Gauge
Autometer Voltmeter
AutoVation Race Pedals
Custom Console Triple Gauge Pod
ITR DC5 Dipstick
ITR DC5 Sidemarkers
ITR Series II Spoiler
Kenwood DDX-7015 Touchscreen Head Unit
Llumar 35 Percent Tint
Momo F16 Evo Shift Knob
Mugen Oil Cap
Mugen Reservoir Covers (rep)
OEM All Weather Floor Mats
OEM Body Kit
OEM Titanium Trim
Scosche Faceplate
Scosche HU Wiring Harness




(... oh wait you said 5-speed) :p


That sounds AWESOME! Just out of curiosity...What are your numbers?
 

·
Registered
2003 Acura RSX 5spd
Joined
·
5,219 Posts
Engine/Engine bay:
CN stage 1 (t3/t4)
3" downpipe
3" mandrel bent exhaust piping
3" Magnaflow muffler
NGK BKR8EIX spark plugs
Spoon reservoir covers
RC 650cc injectors
RC injector clips
Hondata k-pro

Suspension/wheels:
ESMM
18x7.5 Volk LE37-T Gunmetal
225/40/18 Falken Azenis RT-615
Rays valve stems
Volk center caps
Rays lug nuts
CRSX springs
JDM rear floor bar
JDM c-pillar bar

Transmission:
Shift cable linkage bushings
Comptech short shifter

Interior:
Vector 940 radar detector
Tri-gauge pod
AM boost/a-f/oil pres. gauges
Skunk2 shift knob
Compustar 2wss-as

Exterior:
INGs front/rear bumper
A-Spec spoiler
redout tails
20% tints
debagged
jdm replica clear headlights
Mugen Style CF Hood
JDM Window Visors

Not installed:
RBC Intake Manifold (At shop being port-matched)
Hondata Intake Manifold Gasket (awaiting manifold)
BDL 70MM throttle body (awaiting manifold)
GM Boost Solenoid
INGs Replica Side Skirts
 

·
Registered
Joined
·
5,331 Posts
2002 Acura RSX

ENGINE
Jackson Racing Supercharger Race Version
RC 440cc Fuel Injectors
Hondata K-Pro Programmable ECU
Hondata Intake Manifold Heat Gasket
AEM cold air intake
Jackson Racing Race Header + Testpipe
RSX Type S Exhaust
Energy Suspension Motor Mount Inserts
Revotechnica short shifter
Ground wire
Throttle Body Coolant Bypass

EXTERIOR
JDM style black headlights
JDM Integra Type R lip
Type Zero side skirts
OEM rear underspoiler
VIS Carbon Fiber Hood
Redout tail lights

INTERIOR
S2000 Push Start Engine
Autometer Air/Fuel Ratio gauge
Autometer Boost/Vacuum gauge
Pivot Shift Light
Aluminum Dash Trim

WHEELS/SUSPENSION
Megan Racing Coilovers
Ingalls camber kit
Progress Rear Sway and Tie Bar
Hotchkis Front Sway Bar
Mugen Replica Front and Rear Strut Bar
Autotechnic Rear Strut Bar
06 RSX-S Wheels

SOUND
Panasonic Indash DVD
JBL 300.1 mono amp
Alpine Type R 12" sub
Subzero sealed enclosure
 

·
I fight for the SYSTEM
Joined
·
18,625 Posts
Interior
Type S H/U
aftermarket amps/subs (hate em)
OEM interior trim
optional cigarrette burns lol
rubber mats
Revo SS
Aluminum pedals
tweaked gauges


Engine
Denso iridium spk plugs
HKS grounding kit
Hondata K-Pro
custom Type-S to Base RSX JRSC
full '06 Exhaust header, b-pipe, cat, muffler
Hondata IMG
constant CEL light lol


Exterior
Eibach Pro-kit
17"x7.5" BBS rims/225/45R17 summer tires
or 16"x7.5" Enkei fugly's with 235/45R16 track tires
winter mode stock 16" rims with 205/55 R16 winter tires
C-West lip kit (replacing with new lip kit April)
6000K HID low beam kit
5000k HID high beam kit
3000k HID fog light kit
custom dual projector headlights *sold back to stock now*
custom projector fog lights
custom old dumb bitch dent
Bendix ceramic brake pads


Next mods...Summer 2007
Clutch, decent upgraded brakes, bodywork, 6 speed Type S tranny, K24 JRSC'd TSX motor, new unburnt rear seats, remove fucking audio system and restore car to perfection.
 

·
Go Jackets
Joined
·
5,399 Posts
how did you get the SC on your base?
 

·
I fight for the SYSTEM
Joined
·
18,625 Posts
how did you get the SC on your base?
nice looking car man, my color too


basically a friends dad does aluminum fabrication and he gave me a hand with a lot of custom parts; hes also a mechanic so he knew what had to be done and how. i didnt go through belts like the Type S crew either; i got 30k out of the 1st gatorback i threw on it and honestly i didnt need to replace it.

all that matters is making sure the pulleys line up precisely and the manifold is adjusted/lathed just so, aside from that its a bunch of Type S part swaps and a LOT of Hondata work; which i also did not initially do.
 

·
Registered
Joined
·
12 Posts
Damn my car feels so stock compared to you guys

Interior
black broadway
NRG shift knob
leather seats

Suspension
skunk 2 springs

exterior
blue turn signal bulbs

future plans
oem ebay fog lights
 

·
Registered
Joined
·
956 Posts
Engine:
Comptech Icebox
Greddy Evo 2
DCRH SS
ESMM
Hondata IMG
Buddy Club Short Shifter w/ Bushings
Pending Install: Innovative Front Mount and PSWD JDM Drain Bolts

Suspension:
A-Spec Suspension
Mugen Replica F/R Strut Bar
Spoon F/R Lower Ties Bars
Type R Replica Trunk Bar
Type R 22mm Rear Sway Bar

Exterior:
5% Sunguard Tint
8000k HID
Yellow Fogs
17x8 5Zigen Fno1rc HB
Falken Beta 451's
Replica JDM Black Housig Headlights
Pending Install:05-06 Rear Deck Lip Spoiler

Interior:
Optional 5-Speed Aluminum Shift Knob
 

·
Registered
Joined
·
87 Posts
alright, im not wantin this car to be like a race car or anything like that, already got one of those. but i just got my rsx and these are the mods ive got in mind, tell me what you think.
1. injen cold air intake
2. eibach sport line lowering springs
3. tower ties , not sure yet which brand,
4. cat-back exhaust, not shur which one yet,
5. lower eibach sway bars
6. innovative motor mounts
7. DC Sports race headers
8. Revo short shifter kit

anyone have suggestions on a cat-back system or which tower ties to go with id appreaciate it. and do you think after these upgrades a stage two clutch would be a good idea? thanx
and if anyone else has suggestions on any other worth-while mods, with out killin my budget, let me hear'em.
 

·
:P \|/
Joined
·
690 Posts
Discussion Starter · #157 ·
alright, im not wantin this car to be like a race car or anything like that, already got one of those. but i just got my rsx and these are the mods ive got in mind, tell me what you think.
1. injen cold air intake
2. eibach sport line lowering springs
3. tower ties , not sure yet which brand,
4. cat-back exhaust, not shur which one yet,
5. lower eibach sway bars
6. innovative motor mounts
7. DC Sports race headers
8. Revo short shifter kit

anyone have suggestions on a cat-back system or which tower ties to go with id appreaciate it. and do you think after these upgrades a stage two clutch would be a good idea? thanx
I dont know what you mean by tower ties..do you mean strut bars? and the exhaust wont do much for you but if you want the best performance id go with comptech. and by lower eibach sway bars...i think you mean rear sway and id save your money and go with a jdm 22mm. and after those mods, NO a stage 2 clutch would not be a good idea and it would be pointless. hope that helps
 

·
Registered
Joined
·
87 Posts
yea stut bars, im not sure if theres any differances in brands there but? and the eibach kit comes with the front and rear sway bar. still a bad idea? oh and what would you do after these are done? how bout a fly wheel or a pully kit?
 

·
Registered
Joined
·
50 Posts
i just got mine in august 06 but so far i got:

exterior:
greddy front lip
type R side skirts
type R rear lip
honda emblems
redouts
tinted windows 15%
Megan Racing CF Type R spolier

Engine and Suspension
injen SRI
440 injectors
custom short shifter like it sounds and a Neuspeed SS adaptor
Tsudo axleback soon to change to Apexi N1 catback got it here ready to go on
Neuspeed 2" lowering speeds
Greddy Front Upper Sway Bar
Mugen Rear Upper Sway Bar

Audio
Pioneer DEH-4900IB
IPOD adaptor
pioneer speakers all around
soon to do Alpine Type R 12" sub and alpine 450 mono amp
 

·
Go Jackets
Joined
·
5,399 Posts
do you mean upper strut bars?
 
141 - 160 of 186 Posts
Top