MMmmmmmm. Yesssssssssssss
Pholai's 06 NHBP Type S Build - Updates on Page 4-5!!
20
This is my 2006 Acura RSX Type S, purchased it at 55,000 Km back in Oct 2012. Started off as a summer daily and now it has turned into a weekend lapping car. Shoutout to all the homies who have helped me wrench on the car in the past 10 years, and many more to come.
2022
2019
2016
2014
2013
2012
![]()
Current Mod List
Exterior:
Aero Catch Locking Hood Pins
A-spec OEM Rear Lip
A-spec OEM Side Skirts
Custom Wood Front Splitter
JDM DC5R Honda Badges (Front+Rear)
JDM DC5R Clear Side Markers
JDM Honda Access Rain Visors
JDM Honda Integra Tail Lights
J's Racing 3D Type 1 GT Wing (Wetcarbon for DC5)
J's Racing DC5 Street Ver. Front Bumper w/ Carbon Under Panel (Paint Matched NHBP)
J's Racing DC5 Front Carbon Canard and Front Side Wing
J's Racing Front Fenders (15mm+)
Half Nose Front XPEL (PPF)
Mugen License Plate Bolts
Mugen Aero S Front Lip
PCI Front Splitter Bracket
Quik Latch Mini Latches
Seibon MG Style Hood
Interior:
Autopower 4 Point Race Roll Cage
B-pillar back fully gutted (sound deadening, carpet, etc. removed)
Bride FO-Type Low Position Seat Rails
Bride Zeta 3
Chasing Js Ti Steering Wheel Bolts
JDM DC5R Center Console
JDM DC5R Door Sills
Mugen Formula Shift Knob
Mugen Rear View Cover (NHBP)
Momo Monte Carlo 350mm
NSX-R Horn Button
Seeker Shift Knob
Status Racing Hockenheim CF seat
Spoon Sports Wide Rear View Mirror
Takata 4 Point Harness
Works Bell Short Hub
Works Bell Rapfix II
Engine:
Original k20z1
Acuity TPS Sensor
Buddy Club Race Header
Hasport 70a Engine Mounts
Hondata K-Pro V4 (Dyno Tuned)
Injen Short Ram Intake
JDM DC5R Valve Cover
J's Racing Oil Cap
J's Racing Rad Cap
J's Racing Socks
Koyo Aluminum Radiator
K tuned 3" Oval Exhaust
K tuned Intake Thermal Gasket
RBC Intake Manifold
RDX 410cc injectors
Spoon Magnetic Drain Plug Set
Suspension/Brakes/Bracing/Wheels:
BC Racing Coilovers w/ Swift Springs 16k F 28k R
DC5R Brembo Brakes
EM2 Si Front Sway
Endless RF650 Brake Fluid
Hardrace Front Roll Center Adjuster
Hawk DTC 60 Brake Pads
Honed DC5 Air Guide Brake Ducts
J's Racing C Pillar Bar
J's Racing Front Strut Bar
J's Racing Rear Strut Bar
K tuned Inner Tie Rod
K tuned Rear Lower Control Arm w/ Spherical Bushings
Muteki SR48 Lugnuts
PCI Front Spherical Lower Control Arm Bushings
Progress 24mm Adjustable Rear Sway
Progress Rear Subframe Brace
Stoptech Stainless Steel Brake Lines
SPC Front & Rear Camber Kit
SHG Steering Racking Slider
Volk TE37 17x9 22 255/40 RT660 (Street/Track - Wet)
Volk CE28n 17x9 22 255/40 AR1 (Track - Dry)
Transmisson:
Rebuilt z1 transmission with new OEM synchros
Hybrid Racing Short Shifter v1
Exedy Stage 1 Clutch
Competition Lighten Flywheel
Speedfactory HD Dent Spring
Speedfactory Shifter Springs
Wavetrac Helical LSD
Oct 2012:
Fully stock. Car only came with the interior trim from previous owner.
Pick up some parts during the winter of 2012.
A spec OEM High Wing Spoiler
A spec OEM Rear Lip
Rep Mugen Front Lip
2013:
Installed the Rear A-spec and A-spec wing with the mini deck lid
SRI
DC5R ITR Wheels
Ichiba v2 25mm spacers
2022
2019
2016
2014
2013
2012
Current Mod List
Exterior:
Aero Catch Locking Hood Pins
A-spec OEM Rear Lip
A-spec OEM Side Skirts
JDM DC5R Honda Badges (Front+Rear)
JDM DC5R Clear Side Markers
JDM Honda Access Rain Visors
JDM Honda Integra Tail Lights
J's Racing 3D Type 1 GT Wing (Wetcarbon for DC5)
J's Racing DC5 Street Ver. Front Bumper w/ Carbon Under Panel (Paint Matched NHBP)
J's Racing DC5 Front Carbon Canard and Front Side Wing
J's Racing Front Fenders (15mm+)
Half Nose Front XPEL (PPF)
Mugen License Plate Bolts
PCI Front Splitter Bracket
Quik Latch Mini Latches
Seibon MG Style Hood
Interior:
Autopower 4 Point Race Roll Cage
B-pillar back fully gutted (sound deadening, carpet, etc. removed)
Bride FO-Type Low Position Seat Rails
Bride Zeta 3
Chasing Js Ti Steering Wheel Bolts
JDM DC5R Center Console
JDM DC5R Door Sills
Mugen Rear View Cover (NHBP)
Momo Monte Carlo 350mm
NSX-R Horn Button
Seeker Shift Knob
Status Racing Hockenheim CF seat
Spoon Sports Wide Rear View Mirror
Takata 4 Point Harness
Works Bell Short Hub
Works Bell Rapfix II
Engine:
Original k20z1
Acuity TPS Sensor
Buddy Club Race Header
Hasport 70a Engine Mounts
Hondata K-Pro V4 (Dyno Tuned)
Injen Short Ram Intake
JDM DC5R Valve Cover
J's Racing Oil Cap
J's Racing Rad Cap
J's Racing Socks
Koyo Aluminum Radiator
K tuned 3" Oval Exhaust
K tuned Intake Thermal Gasket
RBC Intake Manifold
RDX 410cc injectors
Spoon Magnetic Drain Plug Set
Suspension/Brakes/Bracing/Wheels:
BC Racing Coilovers w/ Swift Springs 16k F 28k R
DC5R Brembo Brakes
EM2 Si Front Sway
Endless RF650 Brake Fluid
Hardrace Front Roll Center Adjuster
Hawk DTC 60 Brake Pads
Honed DC5 Air Guide Brake Ducts
J's Racing C Pillar Bar
J's Racing Front Strut Bar
J's Racing Rear Strut Bar
K tuned Inner Tie Rod
K tuned Rear Lower Control Arm w/ Spherical Bushings
Muteki SR48 Lugnuts
PCI Front Spherical Lower Control Arm Bushings
Progress 24mm Adjustable Rear Sway
Progress Rear Subframe Brace
Stoptech Stainless Steel Brake Lines
SPC Front & Rear Camber Kit
SHG Steering Racking Slider
Volk TE37 17x9 22 255/40 RT660 (Street/Track - Wet)
Volk CE28n 17x9 22 255/40 AR1 (Track - Dry)
Transmisson:
Rebuilt z1 transmission with new OEM synchros
Hybrid Racing Short Shifter v1
Exedy Stage 1 Clutch
Competition Lighten Flywheel
Speedfactory HD Dent Spring
Speedfactory Shifter Springs
Wavetrac Helical LSD
Oct 2012:
Fully stock. Car only came with the interior trim from previous owner.
Pick up some parts during the winter of 2012.
A spec OEM High Wing Spoiler
A spec OEM Rear Lip
Rep Mugen Front Lip
2013:
Installed the Rear A-spec and A-spec wing with the mini deck lid
SRI
DC5R ITR Wheels
Ichiba v2 25mm spacers
41 - 60 of 92 Posts
Update! Dc5-R Recaros! 
i liek this oneUpdate! Dc5-R Recaros!
3
- Installed the seats today! Can't wait for spring now... few more months to go!
2
Check out my freinds flickr page! all shots were done by him!
http://www.flickr.com/photos/lrtse
RSX by tse.photography, on Flickr
http://www.flickr.com/photos/lrtse
RSX by tse.photography, on Flickr
is this from forza?Check out my freinds flickr page! all shots were done by him!
http://www.flickr.com/photos/lrtse
- Man, i gotta go a bit lower in the front! Q____Q
6
Update 2014:
Got a set of Regamaters 17x8 35 and Muteki sr48 lugs
![]()
![]()
![]()
Key!s racing wheel with Works bell short hub and Nrg 2.5 QR
Back to my OEM hood
![]()
![]()
Got a set of Regamaters 17x8 35 and Muteki sr48 lugs
Key!s racing wheel with Works bell short hub and Nrg 2.5 QR
Back to my OEM hood
Droooolz at those Regas!!!!
Clean car man! Love the black and white..And that Key!s Racing steering wheel..I think they have the best leather compared to all the other aftermarket steering wheels! Well, except for ATC Japan, because ATC makes Key!s wheels haha Hope to see you and your car in person sometime in the near future!
Ronald
Clean car man! Love the black and white..And that Key!s Racing steering wheel..I think they have the best leather compared to all the other aftermarket steering wheels! Well, except for ATC Japan, because ATC makes Key!s wheels haha
Hope to see you and your car in person sometime in the near future!Ronald
I wanna come down to Vancouver next summer and track my car so bad! Calgary sucks we have no events at all.....Droooolz at those Regas!!!!
Clean car man! Love the black and white..And that Key!s Racing steering wheel..I think they have the best leather compared to all the other aftermarket steering wheels! Well, except for ATC Japan, because ATC makes Key!s wheels haha
Ronald
10
https://www.flickr.com/photos/lrtse/
Installed my OEM A spec side skirts and picked up my Hasport 70a engine mounts and my T1R 63s exhaust!
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Thanks for Jhoang for these pics! Be sure to check out his IG @ Jayhoang and his blog https://lifewithjson.com !
![]()
![]()
![]()
Installed my OEM A spec side skirts and picked up my Hasport 70a engine mounts and my T1R 63s exhaust!
Thanks for Jhoang for these pics! Be sure to check out his IG @ Jayhoang and his blog https://lifewithjson.com !
19
2015
Seeker shift knob
![]()
Status CF seats
![]()
Volk TE37 17x9 22 came on tiny 215/40, swapped them out for 235/40
![]()
Quick test fit of the new wheels with the 235/40 and they would not clear with the camber I currently had. Adjust the rears a tad bit more at this height just so I could run the wheels for now until I got an alignment. Eventually raised the rears pull in more front camber for track day.
![]()
Week trip with some friends down to Vancouver, BC
![]()
![]()
![]()
![]()
J's front strurt tower bar, J's C pillar, J's Rear strut tower bar and some Spoon socks.
![]()
![]()
Track Day prep - Hawks Hp+ pads and new brake fluid, and an alignment, Also got a JDM Honda access OEM rain visors,
![]()
Track Day
![]()
![]()
![]()
![]()
![]()
![]()
End of 2015.
J's Racing Rad cap and Oil cap
![]()
Works Bell Hub spacer
![]()
Seeker shift knob
Status CF seats
Volk TE37 17x9 22 came on tiny 215/40, swapped them out for 235/40
Quick test fit of the new wheels with the 235/40 and they would not clear with the camber I currently had. Adjust the rears a tad bit more at this height just so I could run the wheels for now until I got an alignment. Eventually raised the rears pull in more front camber for track day.
Week trip with some friends down to Vancouver, BC
J's front strurt tower bar, J's C pillar, J's Rear strut tower bar and some Spoon socks.
Track Day prep - Hawks Hp+ pads and new brake fluid, and an alignment, Also got a JDM Honda access OEM rain visors,
Track Day
End of 2015.
J's Racing Rad cap and Oil cap
Works Bell Hub spacer
41 - 60 of 92 Posts
