Power folding heated mirrors

13434 Views 36 Replies 16 Participants Last post by HeyHiHello, 4 mo ago

Steve Type-S

Discussion Starter · Dec 4, 2009 (Edited)

So today I picked up a set of power folding mirror with switch and relay. I picked up the wrong relay and got the DC2 relay instead :face:. Technically, I can use the DC2 relay (5 pin) to complete the install, but to make the install as close to OEM as possible, I'm gonna go back and switch the DC2 relay for the correct relay (4 pin) :mam:. All for $175 from H-Motors Online (they're local).

Gonna do the install and retain the heated mirror feature on USDM/CDM RSX's. The trick is finding how to mount the heated mirror switch. Full DIY guide w/pics to follow. Probably won't be done until for another couple of weeks due to the holidays, and 'shiet.

Also picked up a set of In-box brand new Honda Access window visors for $150.00 as an added bonus and will write up a DIY install guide for it too.

Lots of DIY guide in the pipeline for December, including EDM rear fog light using the Fit fog light switch (base on gslowr's write-up) and side markers (yet another side marker install). :beerchug:

See less See more

Save

1 - 1 of 37 Posts

azngangsta824

· #33 · Sep 29, 2012

bump for an old thread...

i was planning to do this mod and planning to take the easiest route possible. would i be able to just take off my oem mirrors and bolt on the dc5r power folding ones and wire it up with 3 relays like the diagram that george posted on the first page?

would i be able to see out of both mirrors since those mirrors were made for rhd?