Acura RSX, ILX and Honda EP3 Forum banner

Progress sway Replacement spherical end links?

1K views 2 replies 2 participants last post by  TheRickster 
#1 ·
I have a Progress 24mm rear sway. Previous owner installed, didn't know it had spherical end links, and I already bought the hardrace OEM links.

Just curious what my options are here? If I need to run sphericals, or if I could run the Hardrace ones and if I do what are the effects of that?

Also the bar is rather loose when it's jacked up and I can easily move it side to side, I assume this is because of the bushings and not so much the end links? I have new bushings but curious if I'd even NEED to replace the end links? They are rather rusty, but I can still sort of twist my fingers on them and get the links to swivel a bit around the bolts holding the bar on and the bottom link to the car. If it's not seized up are they still good to go?

Thanks for any help!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top