Acura RSX, ILX and Honda EP3 Forum banner

Rear Sway Bar Reinforcement Brackets

1417 Views 1 Reply 2 Participants Last post by  K20A2
Just surfing the web for parts and came across these. Figured I'm probably not the only one that likes to over engineer stuff while tweaking the car.

Rear Sway Bar Reinforcement Brackets for the 06+ Civic!!!
(pretty sure they fit everything though.)

This bracket is 3/16" thick (150% thicker than the OE bracket) and is made of laser cut CNC'd T304 Stainless Steel. The two smaller holes are threaded and it will come with both bolts necessary to install the bracket. You will need to drill a hole for the second hole on the bracket in order to get full support out of the bracket. The bracket will be placed on the rear side of the vehicle, closer to the rear bumper, the opposite side of the end link.
See less See more
1 - 1 of 2 Posts
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.