Acura RSX, ILX and Honda EP3 Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
got boost?
Joined
·
4,789 Posts
redline is 7800 but the limiter doesn't kick in until 8200 on the 02-04 models. The needle could be a bit off around 8k rpms so the tach could look like its reading 8400 but it bounces back at 8200
 

·
www.magtuning.com
Joined
·
15,007 Posts
redline is 7800 but the limiter doesn't kick in until 8200 on the 02-04 models. The needle could be a bit off around 8k rpms so the tach could look like its reading 8400 but it bounces back at 8200
02-04 is 8100 for fuel cut, asshole.....get it right and our redline is 7900


05-06 is 8300 for fuel cut


and our tachs are inaccurate by about 300 rpms
 

·
WE GOT DEBRIS!
Joined
·
6,949 Posts
I rev mine to about 8400-8500k I think my red line is at 8100
 

·
Registered
Joined
·
977 Posts
Discussion Starter · #5 ·
02-04 is 8100 for fuel cut, asshole.....get it right and our redline is 7900


05-06 is 8300 for fuel cut


and our tachs are inaccurate by about 300 rpms

i dont think you need to freak out on the guy...he was just giving me an answer to the best of his knowledge

maybe ill take a video of my tach but i was def closer to 8,500 than 8,100 when it bounced...who knows
 

·
got boost?
Joined
·
4,789 Posts
02-04 is 8100 for fuel cut, asshole.....get it right and our redline is 7900


05-06 is 8300 for fuel cut


and our tachs are inaccurate by about 300 rpms
my deepest apologies I hope you can forgive me..I have the reflash so I guess I didn't remember the stock redline right..and I'm the asshole right:rolleyes:
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top