Acura RSX, ILX and Honda EP3 Forum banner

Replacing Rear Sway Bar

6K views 9 replies 6 participants last post by  tabKola 
#1 ·
I thought I started this thread already, but I can't find it.

Anyway, I have a 2004 Civic Si. My mechanic said that my rear sway bar needs to be taken off or replaced... so...

I have searched and ordered a salvaged rear sway bar from an Acura RSX type S. According to what I've read this should work.

However, I don't know what other parts I will need to install it. People have suggested that these: http://www.corsportusa.com/store/catalog/product_info.php?products_id=722 will work.

So, do I buy the Si end links or the Acura endlinks? Does it matter?

Do I need anything else to do the job? I watched a video, and it looks pretty simple.

Thanks for any help!
 
#3 ·
From what I've read, the stock ends tend to break when you try to take the original sway bar off... i think mine are already broken... that's why my mechanic wants to replace the sway bar. So do I need the Acura ends or Si ends? They are probably the same.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top