Acura RSX, ILX and Honda EP3 Forum banner

1 - 20 of 659 Posts

·
DMZ
Joined
·
1,004 Posts
Discussion Starter #1 (Edited)
Location : NEW LOCATION (SAN DIEGO area)

Text or call for appointment :
Marvin (619) 212-0128

Please leave a message if we don't answer... no private calls please


Engine Builds/Swaps
(K-series, B-series, F-series, D-series, H-series, GSR and etc...) $400 for direct swap

Cams and Valve Train
K-series cams - $150 / Valve Train - $200 incl. valve adjustment.
B-series cams - $100 / Valve Train - $150 incl. valve adjustment.

Turbo and Supercharger (Jackson Racing & Comptech) call for price

Transmission: if you don't have ESMM this is the best time to get it - TAKES ABOUT 3-5 HRS
Clutch and/or Flywheel - CALL FOR PRICE
LSD, clutch and/or flywheel (combo) - CALL FOR PRICE
LSD - CALL FOR PRICE
Final drive - CALL FOR PRICE

Suspensions and Brakes (struts, shocks, sway bars, rotors, pads and camber kits)
Springs/Coilovers - $80
Brake Pads - $10 per wheel
Brake Pads, brake lines and Rotors - $25 per wheel
F/R Camber Kits - $20 incl. adjustments (not alignment)
EPS (Electric Power Steering) - $300
Strut bars F/R - $20
Sway bar - $20

Troubleshooting $40 will waive if we repair/fix

Bolts-on (Intake, headers, intake manifold, exhaust and etc...)

Intake - $20
Headers - $40
Exhaust - $20
Valve Cover - $20
RBC IM - $50 if it's cut already + $20 if we have to cut

IMG, ESMM, Gauges and quick release steering wheel

IMG - $40
Engine Mounts (Innovative, etc) - $60
ESMM - $40
Coolant Bypass - $20
Quick Release Steering wheel - $50
Gauges A/F - $20
Oil temp - $20
Water temp - $20
Oil pressure - $20

B-series (EK/EG) GSR brake conversion and 4 to 5 lug conversion
- $150

We do side markers, HID and fog lights also but NO BLACKOUTS
Side Markers - $40
HID - $40
Fog Lights - $40

BUT I WILL REFER MY FRIEND FIRST BEFORE YOU GO TO US. SINCE THEY'RE BEEN DOIN THIS BUSINESS. CHECK THIS LINK FIRST and if they're busy give us a call then.
Chadzilla: http://forums.clubrsx.com/showthread.php?t=505134

Any other installation not on the list pm me or CALL
 

·
I Don't Even
Joined
·
9,180 Posts
i can vouch for marvin's work. installed my rbc and other things i needed done:thumbsup:

and his eg6:love: haha
 

·
Registered
Joined
·
688 Posts
I can vouch Marvin, he installed my Hondata IMG today and he totally knows what he is doing. He installs it with quality work and making sure it is done right! Will come back in the future if I need anything else done.
 

·
DMZ
Joined
·
1,004 Posts
Discussion Starter #12
I can vouch Marvin, he installed my Hondata IMG today and he totally knows what he is doing. He installs it with quality work and making sure it is done right! Will come back in the future if I need anything else done.
Thanks :thumbsup:
 

·
I Don't Even
Joined
·
9,180 Posts
1 - 20 of 659 Posts
Top