Acura RSX, ILX and Honda EP3 Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hey All,
I am doing a k24a2 full swap in my 03 rsx type s. my goal here is to do the swap on a budget using parts that I already have (Which is almost everything). I also have a black 02 rsx base that I wrecked the other week. So, I will be using parts off of that to help save on cost. The type s I purchased a few months back that already had a k24a4/k20 build in it. However, upon inspection it looks like a few items are missing or crusty AF. I hope this thread will help as I am just trying to put some content out there! Also I will be shooting some videos and taking plenty of pics.

Parts I have:
K24A2 full engine
k24A2 transmission (internals have already been swapped to type s casing)
New motor mounts
CRV bracket
K tuned tucked wire harness
RDX Blue injectors
Race headers
Kpro
RRC manifold
 

·
Registered
Joined
·
9 Posts
Discussion Starter #2
Here is my black wrecked rsx base I will be using for random parts (senors and etc)
 

Attachments

·
Registered
Joined
·
2 Posts
I have an 04 type s Kpro crv mount. Everything is mostly hooked up besides grounds but I’m having trouble figuring out witch heater houses to use. The type s are about 1.6 inch short. Any ideas?
 
1 - 8 of 8 Posts
Top