Acura RSX, ILX and Honda EP3 Forum banner

Will the EP3R front sway fit a BCRH?

671 views 8 replies 5 participants last post by  saco 
#1 ·
Hey guys,
Been searching around for the last hour or so. Finally decided to throw in the towel.

Will a EP3R front sway bar fit the buddyclub race header?

Only found info on it with the jdm ITR header.
 
#7 · (Edited)
oops edited,
Correct me if i am wrong, but the EM2 comes in 2 sizes. A bigger hollow one, which is the 25.4mm and a solid 15mm-ish one. Hollow one gives you similiar handling characteristics compared to the stock rsx-s one. Solid one gives you more oversteer, and more body roll along as well.

Just seeing if its worth it to get the EP3 R one, or if a EM2 is sufficient. I plan on possibly getting the 25.4mm one for the EM2.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top