Thanks for sharing!
Steel brake line fitting and flare type
Hello everyone!
I have an '02 RSX Type S with a hole in a brake line. The line is from the ABS modulator-control unit to proportioning control valve (#13 in the attached diagram). The part (46379-S6M-A02 Brake Pipe Z) seems to be discontinued, so I will be using coiled brake line tubing (3/16"). Does anyone know what the sizes are for the fittings on either end (ABS modulator control unit and the proportioning control valve), and also the type of flare? (will be using loaner tools from Autozone if they have them available, but Harbor Freight and Amazon are also options).
![]()
I have an '02 RSX Type S with a hole in a brake line. The line is from the ABS modulator-control unit to proportioning control valve (#13 in the attached diagram). The part (46379-S6M-A02 Brake Pipe Z) seems to be discontinued, so I will be using coiled brake line tubing (3/16"). Does anyone know what the sizes are for the fittings on either end (ABS modulator control unit and the proportioning control valve), and also the type of flare? (will be using loaner tools from Autozone if they have them available, but Harbor Freight and Amazon are also options).
1 - 1 of 3 Posts
1 - 1 of 3 Posts
