Alright guys this is a very simple and easy way to spruce up your mugen rear.
Supplies needed
Simple brake light
2 L brackets
Wire
Wire T taps
A few screws
ect
Money
less than 10 for me
Time
1-2 hours
First my LED, simple 8 led light with + and -
![Image]()
Drill a hole in the bottom bumper and feed the wires through
![Image]()
Feed your positive to the 3rd outermost brake light, find your black/white wire and T tap it
![Image]()
Run your ground behind the license plate to the ground on the license plate light
![Image]()
Use the L brackets and mount them on the bumper
![Image]()
Mount the light (screw it in)
![Image]()
Enjoy
![Image]()
If I did it again I would have bought a larger light to better filled the space, but overall Im happy. If you want the light on when the lights are on not when you brake then tap the red wire.
This is what it looks light not light up, so its pretty concealed
![Image]()
![Image]()
Supplies needed
Simple brake light
2 L brackets
Wire
Wire T taps
A few screws
ect
Money
less than 10 for me
Time
1-2 hours
First my LED, simple 8 led light with + and -
Drill a hole in the bottom bumper and feed the wires through
Feed your positive to the 3rd outermost brake light, find your black/white wire and T tap it
Run your ground behind the license plate to the ground on the license plate light
Use the L brackets and mount them on the bumper
Mount the light (screw it in)
Enjoy
If I did it again I would have bought a larger light to better filled the space, but overall Im happy. If you want the light on when the lights are on not when you brake then tap the red wire.
This is what it looks light not light up, so its pretty concealed
